[연세대]

- LOAD 제어
  ㄴ 현재는 기본 ON/OFF, MODE 변경, 값 변경만 Main 화면에서 가능
  ㄴ 이후 Protocol에서 사용가능 한 I-V 모드를 Protocol Running 개발 이후 컷 예정
- BP 제어
  ㄴ Steady State 조건을 기존 3%/3초 유지에서 1kPa/3초 유지로 변경
  ㄴ 고압에서 3%의 범위가 너무 커짐

SingleStation.aliases

@@ -1,3 +1,3 @@
 [내 컴퓨터]
-내 컴퓨터 = "192.168.128.1"
+내 컴퓨터 = "169.254.52.77"
 

SingleStation.lvlps

@@ -1,3 +1,3 @@
 [프로젝트 윈도우_데이터]
-ProjectExplorer.ClassicPosition[String] = "233,26,923,524"
+ProjectExplorer.ClassicPosition[String] = "233,27,923,525"
 

SingleStation.lvproj

@@ -21,8 +21,11 @@
 		<Item Name="INI Read.vi" Type="VI" URL="../FcLibrary/INI Read.vi"/>
 		<Item Name="Init Global Variables.vi" Type="VI" URL="../Modules/Init Global Variables.vi"/>
 		<Item Name="KIMM220602.vi" Type="VI" URL="../KIMM220602.vi"/>
+		<Item Name="Load Out.vi" Type="VI" URL="../Modules/USM LOAD/Load Out.vi"/>
+		<Item Name="Load Send.vi" Type="VI" URL="../Modules/USM LOAD/Load Send.vi"/>
 		<Item Name="Size Initialze.vi" Type="VI" URL="../FcLibrary/Size Initialze.vi"/>
 		<Item Name="TempTest.vi" Type="VI" URL="../TempTest.vi"/>
+		<Item Name="USM LOAD Value.ctl" Type="VI" URL="../Modules/USM LOAD/USM LOAD Value.ctl"/>
 		<Item Name="단국대.vi" Type="VI" URL="../단국대.vi"/>
 		<Item Name="연세대2301.vi" Type="VI" URL="../연세대2301.vi"/>
 		<Item Name="웰덱스.vi" Type="VI" URL="../웰덱스.vi"/>
@@ -312,6 +315,7 @@
 			<Item Name="KIKUSUI_Set Station Current.vi" Type="VI" URL="../Modules/Drivers/KIKUSUI(EXT)/KIKUSUI_Set Station Current.vi"/>
 			<Item Name="KIKUSUI_Set Station Power.vi" Type="VI" URL="../Modules/Drivers/KIKUSUI(EXT)/KIKUSUI_Set Station Power.vi"/>
 			<Item Name="KIKUSUI_Set Station Voltage.vi" Type="VI" URL="../Modules/Drivers/KIKUSUI(EXT)/KIKUSUI_Set Station Voltage.vi"/>
+			<Item Name="Load In.vi" Type="VI" URL="../Modules/USM LOAD/Load In.vi"/>
 			<Item Name="LOG INFO.ctl" Type="VI" URL="../TypeDef/LOG INFO.ctl"/>
 			<Item Name="Log To Chart.vi" Type="VI" URL="../Modules/LOG/Log To Chart.vi"/>
 			<Item Name="Log To Save.vi" Type="VI" URL="../Modules/LOG/Log To Save.vi"/>
@@ -355,9 +359,9 @@
 			<Item Name="Update Status.vi" Type="VI" URL="../Modules/Update Status.vi"/>
 			<Item Name="USM BP Value.ctl" Type="VI" URL="../Modules/USM BP/USM BP Value.ctl"/>
 			<Item Name="USM CELL Value.ctl" Type="VI" URL="../Modules/USM HUM/USM CELL Value.ctl"/>
+			<Item Name="USM Disp Ctrl.vi" Type="VI" URL="../Modules/USM LOAD/USM Disp Ctrl.vi"/>
 			<Item Name="USM Display.vi" Type="VI" URL="../Modules/USM LOAD/USM Display.vi"/>
 			<Item Name="USM HUM Value.ctl" Type="VI" URL="../Modules/USM HUM/USM HUM Value.ctl"/>
-			<Item Name="USM LOAD Value.ctl" Type="VI" URL="../Modules/USM LOAD/USM LOAD Value.ctl"/>
 			<Item Name="USM MASS Value.ctl" Type="VI" URL="../Modules/USM MASS/USM MASS Value.ctl"/>
 			<Item Name="USM P-Heater Value.ctl" Type="VI" URL="../Modules/USM HUM/USM P-Heater Value.ctl"/>
 			<Item Name="USM StartUp.vi" Type="VI" URL="../Modules/USM StartUp/USM StartUp.vi"/>

ini/setting.ini

@@ -13,7 +13,7 @@ Sample Time = "0.100000"
 
 [Driver]
 Com Port = "COM4"
-Load IP = "169.254.7.10"
+VISA Load = "TCPIP0::169.254.7.10::inst0::INSTR"
 
 [Stoic]
 H2 = "7.60"