FC_Single/ini/protocol_blank.Protocol.xml

<Array>
<Name>Protocol Data</Name>
<Dimsize>4</Dimsize>
<Dimsize>3</Dimsize>
<String>
<Name> </Name>
<Val>0</Val>
</String>
<String>
<Name> </Name>
<Val>MASS</Val>
</String>
<String>
<Name> </Name>
<Val>Load Follow : 0
#Target : Path | Stoic Ratio | Min Flow | Set Flow
[AN] H2 : 0 | 1.50 | 0.00 | 0.00
[AN] N2 : 0 | 1.50 | 0.00 | 0.00
[AN(NH3)] HN3 : 0 | 1.50 | 0.00 | 0.00
[AN(NH3)] N2 : 0 | 1.50 | 0.00 | 0.00
[CA] AIr : 0 | 1.50 | 0.00 | 0.00
[CA] N2 : 0 | 1.50 | 0.00 | 0.00</Val>
</String>
<String>
<Name> </Name>
<Val>1</Val>
</String>
<String>
<Name> </Name>
<Val>HUM and TEMP</Val>
</String>
<String>
<Name> </Name>
<Val>#Target : Cell Temp | Cell Heater On | P.Heater Temp | P.Heater On
[CELL]  : 0.00 | 0 | 0.00 | 0

Relative Humidity : 0
#Target : Path | Relative Humidity | Bottle Temp | Bottle Heat
[AN] Dry : 0 | 0.00 | 0.00 | 0
[AN] Wet : 1 | 0.00 | 0.00 | 0
[AN(NH3)] Dry : 0 | 0.00 | 0.00 | 0
[AN(NH3)] Wet : 1 | 0.00 | 0.00 | 0
[CA] Dry : 0 | 0.00 | 0.00 | 0
[CA] Wet : 1 | 0.00 | 0.00 | 0</Val>
</String>
<String>
<Name> </Name>
<Val>2</Val>
</String>
<String>
<Name> </Name>
<Val>BP</Val>
</String>
<String>
<Name> </Name>
<Val>Different BP : 0
#Target : Back Pressure | Outlet?
[Anode]  : 0.00 | 1
[Cathode]  : 0.00 | 1</Val>
</String>
<String>
<Name> </Name>
<Val>3</Val>
</String>
<String>
<Name> </Name>
<Val> </Val>
</String>
<String>
<Name> </Name>
<Val> </Val>
</String>
</Array>